DMD FILM
Properties
F-DMD (6641) is made of two layers of non-woven laminated with one layer of polyester film, the different ofDMD and F-DMD is on the adhesive resin, DMD use the resin of class B while F-DMD use the resin of classF. It has good dielectric properties, high heat resistance and mechanical strength, is suitable for small and medium size electric motors as slot, phase, turn-to-turn, liner insulation of class F.
Data Form
| Properties | Unit | Value | ||||||||||
| Nominal Thickness | mm | 0.15 | 0.18 | 0.20 | 0.23 | 0.25 | 0.30 | 0.35 | 0.40 | |||
| PET Film Thickness | mm | 0.05 | 0.075 | 0.10 | 0.125 | 0.15 | 0.19 | 0.25 | 0.30 | |||
| Thickness Tolerance | mm | ±0.020 | ±0.025 | ±0.030 | ±0.030 | ±0.030 | ±0.035 | ±0.040 | ±0.040 | |||
| Nominal Gram and Tolerance | g/m² | 150±25 | 190±20 | 210±32 | 240±36 | 260±39 | 310±46 | 390±58 | 440±66 | |||
| Tensile Strength | MD | unfold | N/cm | ≥80 | ≥100 | ≥120 | ≥130 | ≥150 | ≥170 | ≥200 | ≥300 | |
| fold | ≥80 | ≥90 | ≥105 | ≥115 | ≥130 | ≥150 | ≥180 | ≥220 | ||||
| TD | unfold | ≥80 | ≥90 | ≥120 | ≥115 | ≥130 | ≥150 | ≥180 | ≥220 | |||
| fold | ≥80 | ≥80 | ≥95 | ≥100 | ≥120 | ≥130 | ≥160 | ≥200 | ||||
| Elongation | MD | % | ≥ 10 | ≥ 5 | ||||||||
| TD | ≥ 15 | ≥ 5 | ||||||||||
| Breakdown Voltage | At room | KV | ≥7 | ≥8 | ≥9 | ≥10 | ≥11 | ≥13 | ≥15 | ≥18 | ||
| At 155 ± 2c | ≥6 | ≥7 | ≥8 | ≥9 | ≥10 | ≥12 | ≥14 | ≥17 | ||||
| Deflexion | MD | N | ≥10 | ≥15 | ≥20 | |||||||
| TD | ≥15 | ≥20 | ≥30 | |||||||||
| Bonding Strength at room temp. | — | No delamination | ||||||||||
| Bonding Strength at 180±2c 10min | — | No delamination, No blister, No adhesive flow | ||||||||||
| Bonding Strength at wateriness | — | No delamination | ||||||||||
Specification
- Standard width: 1000mm, or slit into the width required Packing: In Carton
- Min Qty: 1000kg each size in a lot
- Shelf life: one year from the data of delivery. It can still be used if it is qualified by testing after one year according to above Technical Requirement.
